A lot of users have met this problem when they are trying to install a new operating system on their computers from a USB flash drive: when they are to format the partitions before they motion on to actually getting the new OS installed, they encounter the notification every bit shown above:

"No device drivers were constitute. Make sure that the installation media contains the correct drivers, and and then click OK."

There has not been a general fix-information technology-all solution to this mistake, since the cause of this problem is still rather unclear. But at that place are indeed some effective method that piece of work for the majority of the users that y'all might want to have a try.

So, please effort the following methods until you locate the one that works for yous.

Step one: Try a different port
Stride 2: Become the right USB port drivers
Other options

Step 1: Try a different port

NOTE: This method is for users who are to install Windows seven via a USB thumb bulldoze. This has been proved by a lot to be very effective.

1) When you lot met this problem, plug your USB flash bulldoze out from its current port, then plug it into a different port, which should be a USB 2.0 port.

2) When you terminate doing this, hit the OK button first to shut down this notification window. And then click the red 10 push button on the height right cornerto abolish the installation.

3) So you volition see that you are dorsum to the interface where you are asked to install Windows 7 from the meridian. Hit Install Now to begin.

iv) Repeat the installation steps that y'all accept gone through before, and and so you volition see that you are in the interface where you are asked to choose where you want to install Windows. Choose the disk as per your demand and so hit Side by side to continue.

5) Expect for the rest of the installation procedure to finish.
Step 2: Become the right USB port drivers

One of the reason why you run across this problem could be that your computer has USB 3.0 ports, which are blue, and Windows 7 does non take drivers for USB 3.0 built in.

This could render the failure in installation and make information technology impossible to utilize keyboards or mice for some users.

1) When yous encounter this trouble, cancel the installation first. The next matter you lot exercise is adding the necessary drivers to the installer.

2) Press Windows cardinal and R at the same fourth dimension, then type in devmgmt.msc and hitting Enter. You lot will go to the Device Manager of your figurer.

three) Expand category Universal Serial Bus controllers and check to see the USB driver that you are having now. Every bit shown in the screenshot, I'm having the USB port driver from Intel, so I will download the latest driver for the USB 3.0 controllers from Intel.

Alternatively, you lot can go to the manufacturer website for your PC and type in the modal of your computer to look for the appropriate USB 3.0 controllers driver.

4) When you locate the advisable commuter, download the setup file and and then extract the file to your installer USB. And then start the installation again.

v) Make sure that you have plugged your USB to the USB ii.0 port. When y'all are prompted with the error notification "No device drivers were found.", click OK to shut the window and so click Browse to wait for the driver in your installer USB flash bulldoze.

vi) The installation process should become with not further problems.

For users with Intel NUC, hither is a much much easier fashion to fix this problem.

Download USB 3.0 Creator Utility so install as instructed. Then your problem should be gone for proficient.

TIP: To save you tons of time from searching and downloading device drivers past yourself, why not requite a shot at Driver Like shooting fish in a barrel, the automatic I-click driver updater?

Other options

one) Change the ISO files. Some users discover that the ISO files that they downloaded via Google Chrome was somehow flawed. After they inverse to download path of the ISO and recreated the USB installer, this problem is gone.

2) Modify the BIOS.

Alarm: Please just modify your BIOS simply when you are fully aware of the consequences of faulty modification.

On some computers which take just USB 3.0 ports and no USB 2.0 ports, which support just USB 2.0 devices, the piece of work-arounds are a fiddling scrap more catchy.

You can download USB 3.0 Creator Utility equally mentioned above as an easy set. Just on some computers, users are required to dive into the BIOS to make some changes to the BIOS. The changes include turning off USB 3.0 ports in BIOS. The specific procedures differ on different computers, and yous might need to consult your PC manufacturer for farther assistance.

3) Use DVD to install. Since this is but a trouble occur when yous are installing via USB, then the easy style out is to avert using USB, which get out you with installing via DVD. In that location is no need for you lot to purchase ane at total price, you tin just infringe ane from your friends and return it back afterward the install.

4) Install Windows ten or Windows 8 instead. Windows seven is out before USB 3.0 ports, so there is a large chance that Windows 7 cannot exist installed on computers with only USB 3.0 ports. In this case, why not consider installing Windows x or Windows 8? They are more powerful and more than advanced regardless of some weird problems that occur from fourth dimension to time.

110

110 people found this helpful