How To Install Windows Xp Off Rthe Grid

Windows XP tin can be installed as a fully virtualized guest. This section describes how to install Windows XP equally a fully virtualized guest on Blood-red Chapeau Enterprise Linux.

This procedure covers both the KVM and the Xen hypervisors; the steps are interchangeable and different steps are noted.

The KVM hypervisor requires Carmine Chapeau Enterprise Linux 5.4 or newer.

Earlier commencing this procedure ensure you must have root access.

Presently, Red Chapeau Enterprise Linux hosts on the Itanium® architecture does not support fully virtualized Windows XP guests. Only Windows Server 2003 for Itanium-based Systems is supported for Itanium systems.

Starting virt-manager

Open . Open a connexion to a host (click ). Click the New button to create a new virtual motorcar.
Naming your virtual system

Enter the System Proper name and click the Forward button.
Choosing a virtualization method

If yous selected KVM or Xen earlier (step Step 1 ) you must utilize the hypervisor you selected. This example uses the KVM hypervisor.

Windows can merely be installed using full virtualization.
Choosing an installation method

This screen enables you to specify the installation method and the type of operating system.

Select Windows from the Bone Type list and Microsoft Windows XP from the OS Variant listing.

Installing guests with PXE is supported in Red Hat Enterprise Linux 5.two. PXE installation is not covered past this chapter.

For ISO image files and guest storage images information technology is recommended to use the /var/lib/libvirt/images/ directory. Any other location will require boosted configuration for SELinux, encounter Section xix.2, "SELinux and virtualization" for details.

Press Frontwards to continue.
Cull installation image

Choose the installation epitome or CD-ROM. For CD-ROM or DVD installation select the device with the Windows installation disc in information technology. If you chose ISO Image Location enter the path to a Windows installation .iso epitome.

Press Forwards to go along.
The Storage window displays. Choose a disk partition, LUN or create a file-based paradigm for the guest's storage.

All epitome files are stored in the /var/lib/libvirt/images/ directory by default. In the default configuration, other directory locations for file-based images are prohibited by SELinux. If y'all utilise a different directory yous must label the new directory according to SELinux policy. See Department 19.ii, "SELinux and virtualization" for details.

Allocate extra space if the invitee needs boosted space for applications or other data. For example, web servers require additional space for log files.

Cull the appropriate size for the guest on your selected storage type and click the Forrard push.

Information technology is recommend that yous use the default directory for virtual machine images, /var/lib/libvirt/images/. If you are using a different location (such as /images/ in this case) make sure it is added to your SELinux policy and relabeled before y'all proceed with the installation (after in the document yous will detect information on how to modify your SELinux policy)
Network setup

Select either Virtual network or Shared physical device .

The virtual network option uses Network Address Translation (NAT) to share the default network device with the invitee. Utilize the virtual network selection for wireless networks.

The shared concrete device option uses a network bond to requite the guest full access to a network device.

Press Forward to go on.
The Memory and CPU Allocation window displays. Choose appropriate values for the virtualized CPUs and RAM allocation. These values affect the host's and guest'southward performance.

Guests crave sufficient physical memory (RAM) to run efficiently and finer. Cull a memory value which suits your invitee operating organization and application requirements. Most operating system require at to the lowest degree 512MB of RAM to work responsively. Remember, guests use physical RAM. Running too many guests or leaving bereft memory for the host system results in pregnant usage of virtual retention and swapping. Virtual memory is significantly slower causing degraded system performance and responsiveness. Ensure to allocate sufficient retentivity for all guests and the host to operate effectively.

Assign sufficient virtual CPUs for the guest. If the guest runs a multithreaded application, assign the number of virtualized CPUs the invitee will require to run efficiently. Practise non assign more virtual CPUs than at that place are physical processors (or hyper-threads) bachelor on the host system. It is possible to over allocate virtual processors, however, over allocating has a significant, negative effect on guest and host performance due to processor context switching overheads.
Before the installation continues you will come across the summary screen. Press Finish to proceed to the guest installation:
Yous must make a hardware option and then open a console window quickly after the installation starts. Click Finish and so switch to the virt-director summary window and select your newly started Windows invitee. Double click on the system proper noun and the console window opens. Quickly and repeatedly printing F5 to select a new HAL, once you get the dialog box in the Windows install select the 'Generic i486 Platform' tab. Curl through selections with the Upward and Down arrows.
The installation continues with the standard Windows installation.
Partition the difficult drive when prompted.
Subsequently the drive is formatted, Windows starts copying the files to the hard bulldoze.
The files are copied to the storage device, Windows now reboots.

Restart your Windows guest:

# virsh commencement                WindowsGuest

Where WindowsGuest is the name of your virtual machine.

When the console window opens, you lot volition see the setup phase of the Windows installation.
If your installation seems to get stuck during the setup phase, restart the guest with virsh reboot WindowsGuestName . When you restart the virtual machine, the Setup is being restarted message displays:
After setup has finished you will see the Windows kicking screen:
Now you tin can continue with the standard setup of your Windows installation:
The setup process is complete.

How To Install Windows Xp Off Rthe Grid,

Source: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/5/html/virtualization/sect-virtualization-installing_windows_xp_as_a_fully_virtualized_guest

Posted by: montgomerytheactiones.blogspot.com